Siemens SIMATIC RI 45 PIII Series, Manual

Page: 85 / 132

2-57
RI 45 PIII, Manual
C79000-G7076-C817-01
If you have made any modifications to your standard SETUP settings, you
can enter them in the following table. You therefore have easy access to the
values you have set if you have to make any hardware modifications later.
System Parameter Standard Settings Your Entries
Diskette A (Rack)
Floppy Disk Controller disabled 3.5” , 1,44 MB
Diskette A (Tower)
Floppy Disk Controller disabled disabled
Diskette B Not installed
Hard Disk 1 Submenu: Autotype Fixed Disk
user xxx MB
Hard Disk 2 Not installed
Memory Cache Submenu: Enabled
Cache: Enabled
Memory Shadow Submenu: Enabled
System: Enabled
Video Enabled:
Boot Sequence A: then C:
Numlock On
RI Hardware Options
PCI-MPI/DP
Internal COM1:
Internal COM2:
Internal LPT1:
LPT Mode:
CRT resolution:
CRT 640 x 480:
CRT 800 x 600:
CRT 1024 x 768:
Internal mouse: Submenu
Enabled
3F8, IRQ4
2F8, IRQ3
378, IRQ7
output only
75 Hz
75 Hz
75 Hz
External
Advanced
ISA IRQ Resource
Exclusion
PCI IRQ line 1
PCI IRQ line 2
PCI IRQ line 3
PCI IRQ line 4
Submenu
all available
auto select
auto select
auto select
auto select
Documenting your
Device
Configuration
Motherboard