Siemens SIMATIC RI 45 PIII Series, Manual

Page: 72 / 132

2-44
RI 45 PIII, Manual
C79000-G7076-C817-01
2.12.2 The Advanced Menu
Menu Structure
PhoenixBIOS Setup-Utility
Item Specific Help
F1
ESC
Help
Exit
Select Item
Select Menu
+ / -
Enter Select
Change Values F9
F10
Setup Defaults
Save and Exit Sub-Menu
Main Security Power Version Advanced
Installed O/S: [Other]
Reset Configuration Data: [Yes]
Local Bus IDE adapter:
Floppy disk controller: [Disabled]
[Primary & Secondary]
Large Disk Access Mode: [DOS]
Memory Gap at 15 Mbyte: [Disabled]
COM / LPT Configuration
PCI Configuration
Hard Disk Pre-Delay: [Disabled]
Default Primary Video adapater: [AGP]
Exit Boot Sequence
Peripheral Configuration
Enable Memory ECC: [ECC Scrub]
Figure 2-17 “Advanced” Menu
Installed O/S means that fitted modules are automatically recognized and
installed provided they support plug & play functions.
[No] The BIOS handles the complete plug & play
facilities
[Yes] The operating system handles some of the plug &
play functions
Reset
Configuration
Data [Yes] All previous functions under plug & play are
deleted, and the configuration is retriggered the next
time the system is loaded. The entry is then set to
[No]. System components which have no plug &
play facilities must be entered manually.
[No] The system components with plug & play facilities
are initialized the next time the system is loaded.
Floppy disk
controller freigeben oder sperren des Floppy-Controllers der Grund-
baugruppe (bei LS120 disabled)
Local Bus IDE
adapter [Primary] One IDE interface for up to two
[Secondary] drives.
[Primary and Secondary] Two IDE interfaces for up to four
drives.
[Disabled] No local IDE interface
Large Disk
Access Mode [DOS] The drive tables are designed according to DOS
drive access operations compatible with enhanced
IDE.
[OTHER] The tables are not adapted.
Hard Disk Delay [Disabled] No additional startup time for hard disk
3 to 30 Additional startup time for the hard disk
can be selected
Settings in the
Advanced Menu
Motherboard