Siemens SIMATIC RI 45 PIII Series, Manual

Page: 69 / 132

2-41
RI 45 PIII, Manual
C79000-G7076-C817-01
The following submenu appears when you select the option “Boot Options”
in the main menu:
PhoenixBIOS Setup-Utility
Item Specific Help
F1
ESC
Help
Exit
Select Item
Select Menu
+ / -
Enter Select
Change Values F9
F10
Setup Defaults
Save and Exit Sub-Menu
QuickBoot Mode:
SETUP prompt: [Enabled]
Main Security Power Version Advanced
Boot Options
[Enabled] Allows the system to skip cer-
tain tests while booting. This
will decrease the time needed
to boot the system.
POST Errors: [Enabled]
Floppy check: [Disabled]
Summary screen: [Enabled]
Exit
Boot Sequence
Figure 2-14 “Boot Options” Submenu
Quick Boot
Mode Allows the system to skip certain tests while booting. This will
decrease the time needed to boot the system.
SETUP prompt During the system loading phase, the following SETUP prompt is
output at the bottom of the screen: PRESS <F2> to enter Setup.
POST Errors The loading procedure is aborted if an error is detected during the
system loading phase.
Floppy check During the system loading phase, the floppy head is moved by a
number of steppings to the inside, and then returned again. This
test is useful because the drive is initialized again in the process.
Summary screen The most important system parameters are output on the display at
the end of the system loading phase.
By ‘enabled’ the Feature is free, by ‘disabled’ inhibited.
Option “ Boot
Options”
Motherboard