manualshive.com logo in svg

Siemens SIMATIC PCS 7 FOUNDATION Fieldbus, Commissioning Manual

Share
Download
Siemens SIMATIC PCS 7 FOUNDATION Fieldbus Commissioning Manual Download Page 37

5.2.6

“Interconnection Editor" dialog box

Note
Menu command "Start Connection Editor"         
The "Start Connection Editor" menu command is only enabled in HW Config for the bus link 

(FF Link or Compact FF Link) if the "PDM Foundation Fieldbus" license key is available.

You organize the interconnections for internal FOUNDATION Fieldbus communication in this 

dialog. The automation system does not participate in this communication. The name of this 

function is "Control in the Field" (CiF). CiF can be used to execute technological functions in 

an FF segment. 

Configure each CiF interconnection (hereafter referred to simply as interconnection) in the 

"Connection Editor" dialog. 

Internal device interconnections
FF devices have internal device blocks, such as measuring sensor, controller. The internal 

device interconnection of these blocks means that there is no communication load on the FF 

segment.

Structure

The "Connection Editor" dialog box is divided into the following columns:
"Inputs and interconnections" area
● "Input" column

This column shows the FF devices and the available inputs in the network view of the FF 

segment. Inputs are the target of an interconnection.

● "Internal interconnection" column

This column displays a list of interconnections that were configured for the FF segment.

Layout: Output of the FF device > Function Block > Signal

"Outputs" area
● "Output" column

This column shows the FF devices in the network view of the FF segment and the available 

outputs. Outputs are the source of an interconnection.

Buttons

Button

Function

Add interconnec‐

tion

Click this button to add an interconnection to the column "Interconnections".

Delete intercon‐

nection

Click this button to delete an interconnection.

Close

Click this button to close the dialog box.

A message informs you if changes were not saved. 

Engineering

5.2 Configuring

FOUNDATION Fieldbus

Commissioning Manual, 02/2015, A5E32711026-AC

37

Summary of Contents for SIMATIC PCS 7 FOUNDATION Fieldbus









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands