Settings
6.2 Options
SIMATIC MV500
Operating Manual, 05/2019, C79000-G8976-C495-02
129
Scanner portal
In this group, you can define whether the reader is to take over the function of the master
reader.
Table 6- 24 Scanner portal
Parameter
Possible values
Default
Description
Master reader
☐
/ ☑
☐
Specifies whether this reader should take over the
function of the master reader in a scanner portal
application.
Communication with the higher-level system (e.g.
controller) is performed via the master reader.
Verification
In this group, you can make the settings for the quality classes and verification details.
Table 6- 25 Verification
Parameter
Possible values
Default
Description
Code quality clas-
ses
•
4,3,2,1,0
•
A,B,C,D,F
4,3,2,1,0
You set the type of representation of the quality
grades you prefer. The setting relates both to the
display in the WBM as well as to output via the
interfaces.
Verification details
•
On
•
Off
On
Only for data matrix verification:
On: Verification details such as cell position and
grid lines are calculated and can be displayed.
Off: No details for displaying the verification result
are calculated. This details cannot be displayed.
Note
Assignment of the code quality classes
For information on assigning the code quality classes to the quality evaluation "Good", "Fair",
and "Poor", refer to "Settings > Options > Extras".
The "A, B, C, D, F" representation is available for reasons of compatibility. The "4, 3, 2, 1, 0"
representation is normal. The selected representation has no influence whatsoever on the
result of the verification.
