Operator controls
5.2 Removing the memory card cover
MP 377 15" Touch daylight readable (WinCC flexible)
38
Operating Instructions (Compact), 04/2009, A5E02532357-01
5.2
Removing the memory card cover
Introduction
Installed memory cards are secured and protected in their slots by a slot cover.
Note
Please observe the notes on the memory card in the operating instructions "MP 377".
Procedure
Proceed as follows:
1.
Remove the screw in the slot cover.
2.
Remove the slot cover ① from the HMI device rear panel.
3.
Install a memory card or remove it from the slot.
4.
Insert the slot cover into the slots ②.
5.
Tighten the screw in the slot cover.
