Siemens SIMATIC IPC847E Operating Instructions Manual Download

Page: 84 / 212

Operating the device

5.5 Monitoring of the device

SIMATIC IPC847E

Operating Instructions, 10/2018, A5E43920357-AA

Monitoring

Description

Status display and actions

Monitoring of the

voltages

•

Monitoring of the charge status of the buffer battery

(CMOS)

•

When the first warning threshold is reached, the

backup battery will run for at least 1 more month.

•

For the redundant power supply, monitoring is per-

formed to check whether both power inputs are ac-

tive and the power supply fans are operating.

•

If a critical or error status occurs, an

alarm is output.

•

Acoustic alarm for the redundant

power supply

Drive monitoring

•

Determination of the status of the drives (HDD and

SSD) with SMART functionality even in RAID sys-

tems (RAID status)

•

The status of an inactive hot swap drive is not dis-

played.

•

Status display "HDDx ALARM

(Page 25)"

•

SMART status of the hard drives

•

The following statuses, for example,

are displayed in a RAID system:

"Normal", "OK", "Degraded", error

"Rebuild", rebuilding

Software for device monitoring

You can find information on the monitoring software and its documentation under:

●

SIMATIC IPC DiagBase (Page 85) for monitoring and alarm output locally on the device

●

SIMATIC IPC DiagMonitor (Page 85) for monitoring and alarm output via the network

SIMATIC DiagBase or SIMATIC DiagMonitor also controls the status displays of the IPC,

see: System status displays (Page 25).

Summary of Contents for SIMATIC IPC847E





















































































































































































































Search results

Summary of Contents for SIMATIC IPC847E

Reviews:

Related manuals for SIMATIC IPC847E

Brands by name

Popular brands

Siemens SIMATIC IPC847E, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC847E

Reviews:

Related manuals for SIMATIC IPC847E

Brands by name

Popular brands