Expanding and assigning parameters to the device
6.5 Expansion cards
SIMATIC IPC1047
64
Operating Instructions, 09/2018, A5E45118479-AA
Procedure
The PCI expansion card shown in
the following serves as an example
only.
1. Screw the fixing pins onto the riser
card.
Place the fixing pins onto the inside
of the enclosure and screw them in
place from the outside.
2. Connect the riser card to the
motherboard at the marked position.
3. Release the lock
⑤
(see step 5)
and remove the slot bracket cover.
Place the expansion card onto the
marked slot of the riser card.
Slide the expansion card into the slot
in the arrow direction as far as it will
go without tilting the card.
Note the following:
•
The guide rail runs through the
eye
③
on the left.
•
On the outside, the guide rail
bracket runs into the locking
mechanism
⑤
.
4. In the case of a longer PCI
expansion card, place a card
retainer onto the enclosure from the
inside and screw it in place from the
outside.
5. Press the outside of the guide rail
bracket against the locking element
and screw it in place, as shown.