Siemens SIMATIC C7-613, Manual

Page: 38 / 200

Installing and Wiring the C7-613
2-12
C7-613 Control System
A5E00138934-03
I/O connector X12
For the technological functions, the meaning of the outputs is described in the
columns “Counting”, “Frequency Measuring”, and “Pulse Width Modulation”.
Table 2-3 Connector Pin Assignments for I/O Connector X12
Pin no. Pin
designa-
tion
Signal /
address
Description Counting Frequency
Measuring
Pulse Width
Modulation
1 X12+0.0 DO+0.0 Digital output 0 Channel 0: Output
2 X12+0.1 DO+0.1 Digital output 1 Channel 1: Output
3 X12+0.2 DO+0.2 Digital output 2 Channel 2: Output
4 X12+0.3 DO+0.3 Digital output 3 –
5 X12+0.4 DO+0.4 Digital output 4 –
6 X12+0.5 DO+0.5 Digital output 5 –
7 X12+0.6 DO+0.6 Digital output 6 –
8 X12+0.7 DO+0.7 Digital output 7 –
9 X12+1.0 DO+1.0 Digital output 8 –
10 X12+1.1 DO+1.1 Digital output 9 –
11 X12+1.2 DO+1.2 Digital output 10 –
12 X12+1.3 DO+1.3 Digital output 11 –
13 X12+1.4 DO+1.4 Digital output 12 –
14 X12+1.5 DO+1.5 Digital output 13 –
15 X12+1.6 DO+1.6 Digital output 14 –
16 X12+1.7 DO+1.7 Digital output 15 –