Siemens SIMATIC C7-613, Manual

Page: 148 / 200

A-14
C7-613 Control System
A5E00138934-03
Status, interrupts, diagnostics
Interrupts
•
No interrupts when operated as standard I/O
•
When using the technological functions,
cf. S7-300 Programmable Controller, CPU31xC
Technological Functions” manual
Diagnostic functions
•
No diagnostics when operated as standard I/O
•
When using the technological functions,
cf. S7-300 Programmable Controller, CPU31xC
Technological Functions” manual
Data for selecting an actuator for standard DOs
Output voltage
•
For signal “1” Min. L+ (–0.8 V)
Output current
•
For signal “1”
– Rated value 0.5 A
– Permissible range 5 mA to 0.6 A
•
For “0” signal (residual current) Max. 0.5 mA
Load impedance range 48 Ω to 4 k Ω
Lamp load Max. 5 W
Parallel connection of 2 outputs
•
for redundant load control Possible
•
For performance increase Not possible
Digital input control Possible
Switching frequency
•
For resistive load Maximum 100 Hz
•
with inductive load to IEC 947-5, DC13 Max. 0.5 Hz
•
with lamp load Maximum 100 Hz
•
Fast outputs with resistive load Maximum 2.5 kHz
Inductive breaking voltage limited internally
to
(L+) – 48 V, typically
Short-circuit protected output Yes, electronic
•
Response threshold 1 A, typically