manualshive.com logo in svg

Siemens SCALANCE XR-300M PoE Series, Compact Operating Instructions

Share
Download
Siemens SCALANCE XR-300M PoE Series Compact Operating Instructions Download Page 3

Table of contents

1

Introduction ........................................................................................................................................... 5

2

Safety instructions............................................................................................................................... 11

3

Security recommendations.................................................................................................................. 13

4

Device description ............................................................................................................................... 19

4.1

Product overview ............................................................................................................... 19

4.1.1

Spare parts ........................................................................................................................ 22

4.2

Product properties and device views................................................................................... 23

4.3

SET/SELECT button............................................................................................................. 25

4.4

LED display ........................................................................................................................ 26

4.5

C-PLUG .............................................................................................................................. 30

4.5.1

Area of application and function of the C-PLUG................................................................... 30

4.5.2

Removal and insertion of the C-PLUG (rack devices)............................................................ 31

5

Installation and disassembly ............................................................................................................... 33

5.1

Safety notices for installation ............................................................................................. 33

5.2

Requirements for the cabinet EN 60529 (ATEX), UKEX, IECEx and CCC-Ex............................ 34

5.3

Installation ........................................................................................................................ 35

5.4

Safety requirements - Installation 100 to 240 VAC .............................................................. 36

5.5

19" rack mounting ............................................................................................................. 36

5.6

Vertical installation of rack devices ..................................................................................... 40

5.7

Desktop operation ............................................................................................................. 40

5.8

Installation of modular devices........................................................................................... 41

5.8.1

Installation and removal of media modules ........................................................................ 41

5.8.2

SFP installation in SFP media module ................................................................................. 45

5.9

Disassembly....................................................................................................................... 47

6

Connecting up ..................................................................................................................................... 49

6.1

Safety when connecting up................................................................................................ 49

6.2

Notes on commissioning.................................................................................................... 49

6.3

Wiring rules ....................................................................................................................... 50

6.4

Connecting functional ground............................................................................................ 51

6.5

Signaling contact ............................................................................................................... 52

6.6

Diagnostics port................................................................................................................. 53

6.7

Power supply ..................................................................................................................... 55

6.7.1

Connecting devices with 24 VDC power supply................................................................... 56

SCALANCE XR-300M PoE
Compact Operating Instructions, 03/2022, A5E02661178-15

3

Summary of Contents for SCALANCE XR-300M PoE Series





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands