manualshive.com logo in svg

Siemens SCALANCE XR-300M PoE Series, Compact Operating Instructions

Share
Download
Siemens SCALANCE XR-300M PoE Series Compact Operating Instructions Download Page 30

Meaning in display mode D

LED color

LED status

Meaning

-

off

The port is not monitored; in other words, if a link is not 
established at the port, this does not trigger the signaling 
contact.

green

on

The port is monitored, in other words, if no connection was 
established at the port (for example no cable inserted), this 
triggers the signaling contact and an error state results.

orange

on

The port is monitored, in other words, when a valid con‐
nection exists at the port (for example non-permitted cable 
inserted), this triggers the signaling contact and an error 
state results.

4.5

C-PLUG

4.5.1

Area of application and function of the C-PLUG

Area of application

The C-PLUG (configuration plug) that ships with the product is an exchangeable memory 
medium for storing the configuration data of the device. The device can also be operated 
without a C-PLUG.

This allows fast and uncomplicated replacement of a device. The C-PLUG is taken from the 
previous device and inserted in the new device. The first time it is started up, the replacement 
device has the same configuration as the previous device except for the MAC address set by the 
vendor.

Principle

The data remains stored on the C-PLUG even when power is turned off. In terms of using the C-
PLUG, there are two ways of operating the device:

• With unwritten C-PLUG

If an empty C-PLUG (factory settings or deleted with the Clean function) is inserted, all the 
configuration data of the device is saved to it automatically when the device starts up. 
Changes to the configuration during operation are saved without operator intervention on 
the C-PLUG if this is in the "ACCEPTED" status. This depends on how you configured your 
SCALANCE device. In this mode, the internal memory is neither read nor written. This mode 
is active when a C-PLUG is inserted.

• With written C-PLUG

A device with an accepted C-PLUG inserted uses the configuration data of the C-PLUG 
automatically when it starts up. Acceptance is possible only when the data was written by a 
compatible device type.

Device description
4.5 C-PLUG

SCALANCE XR-300M PoE

30

Compact Operating Instructions, 03/2022, A5E02661178-15

Summary of Contents for SCALANCE XR-300M PoE Series





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands