Siemens SCALANCE XR-300M PoE Series Compact Operating Instructions Download Page 84

Page: 84 / 92

Note

Only variants with 24 VDC power supply meet the requirements of this approval.

cULus Approval for Information Technology Equipment

cULus Listed I. T. E.

Underwriters Laboratories Inc. complying with

• UL 60950-1 (Information Technology Equipment)

• CSA C22.2 No. 60950-1-03

Report no. E115352

Note

Only variants with 24 VDC power supply meet the requirements of this approval.

cULus approval for industrial control equipment

cULus Listed IND. CONT. EQ.

Underwriters Laboratories Inc. complying with

• UL 508

• CSA C22.2 No. 142-M1987

Report no. E85972

Note

Only variants with 100 to 240 VAC power supply meet the requirements of this approval.

cULus Approval Hazardous Location

cULus Listed I. T. E. FOR HAZ. LOC.

Approvals
10.1 Restriction EMC (railway applications) TS device variant

SCALANCE XR-300M PoE

Compact Operating Instructions, 03/2022, A5E02661178-15

Summary of Contents for SCALANCE XR-300M PoE Series





























































































Search results

Summary of Contents for SCALANCE XR-300M PoE Series

Reviews:

Brands by name

Popular brands

Siemens SCALANCE XR-300M PoE Series, Compact Operating Instructions

Search results

Summary of Contents for SCALANCE XR-300M PoE Series

Reviews:

Brands by name

Popular brands