manualshive.com logo in svg

Siemens SCALANCE XR-300M PoE Series, Compact Operating Instructions

Share
Download
Siemens SCALANCE XR-300M PoE Series Compact Operating Instructions Download Page 31

Response to errors

Inserting a C-PLUG that does not contain the configuration of a compatible device type, 
accidentally removing the C-PLUG or general malfunctions of the C-PLUG are signaled by the 
diagnostics mechanisms of the device (LEDs, Web-based management, SNMP, CLI and PROFINET 
diagnostics).

4.5.2

Removal and insertion of the C-PLUG (rack devices)

NOTICE
A C-PLUG may only be removed or inserted when the device is turned off.

Position of the C-PLUG with rack devices

With rack devices, the slot is below a cover on the right-hand side of the 
housing. After undoing the screw (screw head Torx T10), the cover 
plate can be removed and the slot is accessible.

Removing the C-PLUG

A

1. Turn off the power to the device.
2. Remove the cover plate on the right-hand side of the device.
3. Insert a screwdriver between the front edge of the C-PLUG (position 

A) and the slot and release the C-PLUG.

4. Remove the C-PLUG and screw the cover plate firmly in place again.

Inserting the C-PLUG

B

1. Turn off the power to the device.
2. Remove the cover plate on the right-hand side of the device.
3. The housing of the C-PLUG has a protruding ridge on the long side 

(position B). The slot has a groove at this position. Insert the C-PLUG 
correctly oriented into the slot.

4. Secure the cover plate again with the screws.

Device description

4.5 C-PLUG

SCALANCE XR-300M PoE
Compact Operating Instructions, 03/2022, A5E02661178-15

31

Summary of Contents for SCALANCE XR-300M PoE Series





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands