manualshive.com logo in svg

Siemens SCALANCE XR-300M PoE Series, Compact Operating Instructions

Share
Download
Siemens SCALANCE XR-300M PoE Series Compact Operating Instructions Download Page 46

1.

Select the required SFP media module in the slot of 
the device. (Example: X-308-2M, slot 2)

2.

Insert the SFP with the clip closed in the SFP media 
module.
Notice: Closing the clip after insertion does not lock 
the device in the rack.

3.

The SFP can be heard to lock in place and is there‐
fore firmly secured.

4.

Plug the connecting cable into the SFP.
The connecting cable can be heard to lock in place 
and is then firmly secured.

 

Removing an SFP

1. Remove the cable connected to the SFP.

2. Open the clip on the SFP and remove the SFP from the SFP media module.

Notice: It must be possible to remove the SFP easy without using force.

3. Fit a blind plug to the SFP.

Installation and disassembly
5.8 Installation of modular devices

SCALANCE XR-300M PoE

46

Compact Operating Instructions, 03/2022, A5E02661178-15

Summary of Contents for SCALANCE XR-300M PoE Series





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands