Siemens SCALANCE XB-000 Operating Instructions Manual Download | Manualshive

Page: 37 / 102

background image

Assembly and disassembly

5

5.1

Safety notices for installation

Safety notices

When installing the device, keep to the safety notices listed below.

WARNING

If the device is installed in a cabinet, the inner temperature of the cabinet corresponds to the
ambient temperature of the device.

WARNING

If the cable or conduit entry point exceeds 70 °C or the branching point of conductors exceeds
80 °C, special precautions must be taken. If the equipment is operated in an air ambient in
excess of 60 ℃, only use cables with admitted maximum operating temperature of at least 80
℃.

NOTICE
Improper mounting

Improper mounting may damage the device or impair its operation.
• Before mounting the device, always ensure that there is no visible damage to the device.
• Mount the device using suitable tools. Observe the information in the respective section

about mounting.

Safety notices on use in hazardous areas

General safety notices relating to protection against explosion

WARNING

EXPLOSION HAZARD

Replacing components may impair suitability for Class 1, Division 2 or Zone 2.

WARNING

The device is intended for indoor use only.

SCALANCE XB-000
Operating Instructions, 01/2022, A2B00077300-11

37

«
...
35
36
37
38
39
...
»

Summary of Contents for SCALANCE XB-000







































































































Reviews:

No comments

Related manuals for SCALANCE XB-000

Brand: Habitat Pages: 48

Brand: FOR-A Pages: 2

Brand: Garland Pages: 43

Brand: HELVAR Pages: 2

Brand: Caton Pages: 18

Brand: Caen Pages: 14

Brand: Pakedge Device & Software Pages: 14

Brand: TP-Link Pages: 2

Brand: PaloAlto Networks Pages: 28

Brand: Mobily Pages: 12

Safeguard for Privileged Sessions 3000

Brand: One Identity Pages: 37

Brand: Xaptum Pages: 24

Brand: Zapp Pages: 24

Brand: MSE Pages: 35

Brand: ADTRAN Pages: 2

NetVanta 1335 Series

Brand: ADTRAN Pages: 4

Brand: ADTRAN Pages: 2

Brand: ADTRAN Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands