Siemens SCALANCE XB-000 Operating Instructions Manual Download

Page: 92 / 102

You will find the EC declaration of conformity for these products on the Internet pages of
Siemens Industry Online Support (

https://support.industry.siemens.com/cs/ww/en/ps/15273/

cert

The EC Declaration of Conformity is available for all responsible authorities at:

Siemens Aktiengesellschaft

Digital Industries
DE-76181 Karlsruhe
Germany

UK Declaration of Conformity

The UK declaration of conformity is available to all responsible authorities at:

Siemens Aktiengesellschaft
Digital Industries
Process Automation
DE-76181 Karlsruhe
Germany

Importer UK:

Siemens plc,
Manchester M20 2UR

You can find the current UK Declaration of Conformity for these products on the Internet pages
under Siemens Industry Online Support (

https://support.industry.siemens.com/cs/ww/en/ps/

15273/cert

The SIMATIC NET products described in this document meet the requirements of the following
directives:

• UK-Regulation

SI 2016/1107 Equipment and Protective Systems Intended for use in Potentially Explosive
Atmospheres Regulations 2016, and related amendments

• EMC Regulation

SI 2016/1091 Electromagnetic Compatibility Regulations 2016, and related amendments

• RoHS Regulation

SI 2012/3032 Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012, and related amendments

Approvals

SCALANCE XB-000

Operating Instructions, 01/2022, A2B00077300-11

Summary of Contents for SCALANCE XB-000







































































































Search results

Summary of Contents for SCALANCE XB-000

Reviews:

Related manuals for SCALANCE XB-000

Brands by name

Popular brands

Siemens SCALANCE XB-000, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE XB-000

Reviews:

Related manuals for SCALANCE XB-000

Brands by name

Popular brands