Siemens SCALANCE XB-000 Operating Instructions Manual Download

Page: 50 / 102

Pin 2

M (24 VAC, 50/60 Hz)

Pin 3

L+ (24 VAC, 50/60 Hz)

WARNING

Incorrect power supply

The power supply unit for supplying the devices must comply with NEC Class 2 or LPS (voltage
range 19.2 - 28.8 V, current requirements 350 mA).

Do not operate the devices with AC voltages higher than 28.8 VAC.

6.3.2

Power supply 24 VDC

You can operate the following devices with a 24 V DC power supply:

• XB004-1

• XB004‑2

• XB004-1LD

• XB004-2LD

• XB005

• XB008

• XB004-1G

• XB004-1LDG

• XB005G

• XB008G

The following figure shows the position of the power supply and the assignment of the terminal
block.

Connecting up
6.3 Power supply

SCALANCE XB-000

Operating Instructions, 01/2022, A2B00077300-11

Summary of Contents for SCALANCE XB-000







































































































Search results

Summary of Contents for SCALANCE XB-000

Reviews:

Related manuals for SCALANCE XB-000

Brands by name

Popular brands

Siemens SCALANCE XB-000, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE XB-000

Reviews:

Related manuals for SCALANCE XB-000

Brands by name

Popular brands