Siemens SCALANCE XB-000 Operating Instructions Manual Download

Page: 35 / 102

Connectors

The cables are connected to SC sockets.

4.6

LEDs

Power LED 'L' (green LED)

The power LED shows the status of the power supply.

LED color

LED status

Meaning

Green

Lit

Power supply is connected

Off

Power supply is not connected or the applied voltage is too low.
Refer also to the section "Possible sources of errors and eliminating errors
(Page 55)"

Port LED 'P' (green LED)

The port LEDs indicate the status of the ports. The port LEDs are located directly on the port.

LED color

LED status

Meaning

Green

Lit

Link exists, no data reception at port

Green

Flashing

Link exists, data reception at port

Green

Flashing / flash on and
off in sequence

Test phase during power on

Description of the device

4.6 LEDs

SCALANCE XB-000
Operating Instructions, 01/2022, A2B00077300-11

Summary of Contents for SCALANCE XB-000







































































































Search results

Summary of Contents for SCALANCE XB-000

Reviews:

Related manuals for SCALANCE XB-000

Brands by name

Popular brands

Siemens SCALANCE XB-000, Operating Instructions Manual

Search results

Summary of Contents for SCALANCE XB-000

Reviews:

Related manuals for SCALANCE XB-000

Brands by name

Popular brands