Siemens SCALANCE XB-000 Operating Instructions Manual Download | Manualshive

Page: 84 / 102

background image

Technical specifications
Response to spanning tree BPDU
frames

Forwarding

CoS acc. to IEEE 802.1Q

Yes

QoS priority queues

8

IEEE 802.1Q tags (VLAN ID, priority)
transparent forwarding

Yes

Maximum frame size

1536 bytes

Forwarding of PRP frames (Parallel Re‐
dundancy Protocol)

Yes

Note

The number of IE switches of the SCALANCE XB-000 product line connected in a line influences
the frame delay.

When a frame passes through IE switches of the SCALANCE XB‑000 product line, it is delayed by
the store and forward function of the switch
• with a 64 byte frame length by approx. 10 microseconds (at 100 Mbps)
• with a 1500 byte frame length by approx. 130 microseconds (at 100 Mbps)

This means the more devices of the SCALANCE XB‑000 product line that the frame passes
through, the longer the frame propagation time.

8.10

SCALANCE XB008G

Note

Note the article number in the technical specifications.

Table 8-14

Technical specifications of the SCALANCE XB008G (6GK5 008-0GA00-1AB2)

Technical specifications
Article number
SCALANCE XB008G

6GK5 008-0GA00-1AB2

Attachment to Industrial Ethernet
Quantity

8

Design

RJ-45 jacks with MDI‑X pinning

Properties

Half / full duplex

Transmission rate

10 / 100 / 1000 Mbps

Permitted cable lengths (Industrial
Ethernet)

Alternative combinations per length range

Technical specifications
8.10 SCALANCE XB008G

SCALANCE XB-000

84

Operating Instructions, 01/2022, A2B00077300-11

«
...
82
83
84
85
86
...
»

Summary of Contents for SCALANCE XB-000







































































































Reviews:

No comments

Related manuals for SCALANCE XB-000

Brand: Sagem Pages: 19

Brand: Xantrex Pages: 8

NetVanta 6355 PoE

Brand: ADTRAN Pages: 46

Fieldpoint cFP-RTD-124

Brand: National Instruments Pages: 15

Brand: Paradyne Pages: 23

Vigor 2760 Series

Brand: Draytek Pages: 54

InvenSense RoboKit1

Brand: TDK Pages: 13

Brand: TP-Link Pages: 87

Brand: Acorn Computers Limited Pages: 2

Brand: Lanner Pages: 99

Brand: Inter-m Pages: 20

Brand: Hameg Pages: 46

ForeFront 2616RC

Brand: Patton electronics Pages: 80

Brand: MasterForce Pages: 12

301269U - Ethernet Disk Mini Home Edition 500 GB Network Attached Storage Hard...

Brand: LaCie Pages: 74

EIR508-2-T Series

Brand: B&B Electronics Pages: 71

Brand: MikroTik Pages: 2

Brand: MYERS Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands