Siemens RUGGEDCOM M2200, Installation Manual

Page: 37 / 50

RUGGEDCOM M2200
Installation Guide
Chapter 5
Technical Specifications
Fiber Optic Ethernet Port Specifications 27
Connector micro-D
Speed 1000 Mbps
Duplex
e
FDX/HDX
Cable Type
f
> CAT-5
Wiring Standard
g
TIA/EIA T568A/B
Maximum Distance
h
100 m (328 ft)
Isolation
i
1.5 kV
e
Auto-Negotiating
f
Shielded or unshielded.
g
Auto-crossover and auto-polarity.
h
Typical distance. Dependent on the number of connectors and splices.
i
RMS 1 minute.
Section 5.5
Fiber Optic Ethernet Port Specifications
The following details the specifications for fiber Ethernet ports that can be ordered with the RUGGEDCOM M2200.
Gigabit Ethernet (1 Gbps) Optical Specifications
NOTE
These transceivers utilize a distributed feedback (DFB) type laser and are rated for -20 to 85 °C (-4 to
185 °F) operation only.
Tx (dBm)
l
Mode
Connector
Type
Cable
Type (µm)
j
Tx λ (nm)
k
Minimum Maximum
Rx
Sensitivity
(dBm)
l
Rx
Saturation
(dBm)
l
Distance
(km)
m
Power
Budget
(dB)
MM LC 50/125 850 -9 -2.5 -20 0 0.5 11
MM LC 62.5/125 850 -9 -2.5 -20 0 0.5 11
SM LC 9/125 1310 -9.5 -3 -21 -3 10 11.5
SM LC 9/125 1310 -7 -3 -24 -3 25 17
j
All cabling is duplex type unless specified otherwise.
k
Typical.
l
All optical power numbers are listed as dBm averages.
m
Typical distance. The maximum segment length is greatly dependent on factors such as fiber quality, and the number of patches and splices. Consult a Siemens
sales associates when determining maximum segment distances.