Siemens RUGGEDCOM M2200, Installation Manual

Page: 36 / 50

Chapter 5
Technical Specifications
RUGGEDCOM M2200
Installation Guide
26 Failsafe Relay Specifications
Section 5.2
Failsafe Relay Specifications
Parameter Value (Resistive Load)
Max Switching Voltage 240 VAC, 125 VDC
Rated Switching Current 2 A @ 240 VAC, 0.15 A @ 125 VDC, 2 A @ 30 VDC
Maximum Switching Capacity 150 W, 500 VA
Section 5.3
Supported Networking Standards
Standard 10 Mbps Ports 100 Mbps Ports 1000 Mbps Ports Description
IEEE 802.3u
ü
100BaseTX/100BaseFX
IEEE 802.3x
ü ü ü
Flow Control
IEEE 802.3z
ü
1000BaseLX
IEEE 802.3ab
ü
1000BaseTx
IEEE 802.3ad
ü
Link Aggregation
IEEE 802.1D
ü ü ü
MAC Bridges
IEEE 802.1D
ü ü ü
Spanning Tree Protocol (STP)
IEEE 802.1p
ü ü ü
Class of Service (CoS)
IEEE 802.1Q
ü ü ü
VLAN (Virtual LAN) Tagging
IEEE 802.1w
ü ü ü
Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1x
ü ü ü
Port-Based Network Access Control
IEEE 802.1Q-2005
(formerly 802.1s)
ü ü ü
Multiple Spanning Tree Protocol (MSTP)
Section 5.4
Copper Ethernet Port Specifications
The following details the specifications for copper Ethernet ports that can be ordered with the RUGGEDCOM
M2200.
NOTE
• Maximum segment length is greatly dependent on factors such as fiber quality, and the number
of patches and splices. Consult a Siemens sales associate when determining maximum segment
distances.
• All optical power numbers are listed as dBm averages.
• F51 transceivers are rated for -40 to 85 °C (-40 to 185 °F).