Siemens OZS164 SERIES WEB SERVER Commissioning Instructions Download Page 59

Page: 59 / 108

3.4 File

transfer

"File transfer" helps to

•

Upload documents to the web server.

•

Download message history as Excel or text file:

•

Upload system definitions.

•

Upload logos.

Upload documents

Procedure:
1.

Select File transfer in primary navigation.

2. Click

Add

Select the desired file.

4. Click

Upload

to finish.

•

Make sure there is enough memory for uploading.

•

The Administrator and Service levels allow for uploading documents.

Notes

Download message
history

Procedure:
1.

Select Message history from secondary navigation.

2. Click next to the desired document

(messages.txt: Text file, messages.xls: Excel file).
The "File download" dialog box opens.

Open the file with the application or save it to any location.

59 / 108

Siemens Web

server

CE1C5711en

Building Technologies

Operate using a web browser

25.08.2010

Summary of Contents for OZS164 SERIES WEB SERVER













































































































Search results

Summary of Contents for OZS164 SERIES WEB SERVER

Reviews:

Related manuals for OZS164 SERIES WEB SERVER

Brands by name

Popular brands

Siemens OZS164 SERIES WEB SERVER, Commissioning Instructions

Search results

Summary of Contents for OZS164 SERIES WEB SERVER

Reviews:

Related manuals for OZS164 SERIES WEB SERVER

Brands by name

Popular brands