Path: Home > 0.5 OZS164… > Settings > Communication > E-mail
•
Enter these settings if the web server is to send an e-mail for a fault.
•
Additional information on e-mail settings is available in Section 5.2.
Notes
Data point
Explanation, example
A
ddress mail server
Default val.:
smtp.example.com
Setting val:
Max. 46 characters
The provider supplies the IP address or mail
server domain name. Often referred to as the
outgoing mail server or SMTP server instead of
ail server.
m
—
P
ort number mail server
Default val.: 25
Setting val:
1…65535
Port number 25 is default for the mail server
and does not normally require change).
(
—
E
-mail address sender
Default val.:
[email protected]
Setting val:
Max. 46 characters
The setting corresponds to the e-mail address
of the web server.
The e-mail address is displayed in the "From"
ield of each e-mail.
f
—
Authentification mail
erver
s
Default val.: No
Setting val:
No/Yes
Select
Yes
for mail server access with
authentication.
In this case, user name and password (data
oints below) are required.
p
—
U
ser name
Default val.: (Blank)
Setting val:
Max. 46
characters
User name and password help authenticate
ach e-mail via the mail server.
e
—
P
assword
Default val.: (Blank)
Setting val:
Max. 46
characters
Password and user name help authenticate
ach e-mail via the mail server.
e
—
S
ignature line 1..10
Default val.: (Blank)
Setting val:
Max. 46
characters
Signatures are transmitted with the e-mail.
They identify the sender, e.g. the plant's
nternet address.
I
—
26 / 108
Siemens Web
server
CE1C5711en
Building Technologies
Commissioning
25.08.2010
