The following information can be applied to troubleshooting modem, SIM card, and
network as needed. It shows current states and settings.
Modem
Path: Home > 0.5 OZS164… > Device information > Modem
Data point
Explanation, example
State modem
State modem: Shows the current modem status.
•
In service
: Is the standard status after a GSM
network is identified.
•
Emergency only
: Connected to GSM network without
authorization (excepting emergency calls).
•
Out of service
: Shows that no GSM network was
found where the SIM card is valid.
•
Power off
: Temporary status following power failure
until sufficient power is again supplied.
Signal strength
Radio signal strength of modem in percent:
0…20:
Weak: Reposition web server or install
antenna extension (recommended).
21…40: Low
41…60: Good
61…80: Very
good
8 1…100: Excellent
Modem module S
hows the modem module designation.
Software version S
hows the software version of the modem module.
IMEI
Shows IMEI (International Mobile Station Equipment
dentity) for the modem.
I
State SIM card
State SIM card shows the SIM card status.
•
No SIM card
found inserted.
•
Network PIN required
: Network registration in
progress, waiting for network reply.
•
User PIN required
: Network registration in progress,
waiting for user PIN entry.
•
User PUK required
: Status after 3 wrong PIN entries.
Procedure: Remove SIM card from web server, insert
in mobile phone and enter PUK (personal unblocking
key). Reinsert SIM card in web server and continue
with correct PIN.
•
Ready
: Normal status after successful network login.
Phone number
provider
The setting value corresponds to the phone number
assigned by the external telephone provider (e.g.
wisscom) to send messages.
S
55 / 108
Siemens Web
server
CE1C5711en
Building Technologies
Operate using a web browser
25.08.2010