Siemens OZS164 SERIES WEB SERVER Commissioning Instructions Download

Page: 53 / 108

The following information displays the current settings and states on the LPB/BSB
bus.

LPB / BSB

Path: Home > 0.5 OZS164… > Device information > LPB / BSB

Data point

Explanation, example

Connected bus

The web server autonomously identifies the bus
system connected. Possible values ---, LPB,

SB.

Segment number

art of the LPB device address.

Device number

art of the LPB device address.

Clock time source*

•

Autonomous

: Time/date is created from the

Quartz of the web server. No synchronization
with bus devices.

•

Slave with remote setting

: Web server

receives time/date from master. The master
supplies both date and time on the web
server and is then sent to all bus devices.

•

Slave without rem setting

: Web server

receives time/date from master. The web
server date/time setting is not sent to the
master. The master resets date/time.

•

Master

: Time/date is created from the Quartz

of the web server. The web server supplies
both date and time to all bus devices.

Recommended: Configure the web server as
Master and the bus device as slave with or

ithout remote setting.

Number of devices max Maximum possible number of devices monitored

y the web server on the LPB/BSB bus.

Number of devices
current

Actual number of devices monitored by the web

erver on the LPB/BSB bus.

Last change

ime of last change to device list.

* This setting only works on the LPB. The clock time supplier is assigned
automatically on the BSB.

53 / 108

Siemens Web

server

CE1C5711en

Building Technologies

Operate using a web browser

25.08.2010

Summary of Contents for OZS164 SERIES WEB SERVER













































































































Search results

Summary of Contents for OZS164 SERIES WEB SERVER

Reviews:

Related manuals for OZS164 SERIES WEB SERVER

Brands by name

Popular brands

Siemens OZS164 SERIES WEB SERVER, Commissioning Instructions

Search results

Summary of Contents for OZS164 SERIES WEB SERVER

Reviews:

Related manuals for OZS164 SERIES WEB SERVER

Brands by name

Popular brands