Siemens OpenStage15 Operating Manual Download Page 44

Page: 44 / 158

Step by step

Basic functions

Consulting a second party

You can call a second party while a call is in progress.
The connection to the first party is on hold.

Prerequisite:

You are conducting a call.

Confirm the option shown.

Enter and confirm the second party’s phone number.

Ending or canceling a consultation call

Select and confirm the option shown.

The call with the first party is resumed.

Ending the first call

Select and confirm the option shown in the first call’s
context menu.

The connection to the second party remains active.

Switching to the held party (alternating)

Prerequisite:

You are conducting a consultation call.

Select and confirm the option shown.

In the first display line, the phone number or name and
the duration of the active connection are displayed.

Ending an alternate operation

Select and confirm the option shown.
The active call is disconnected and the held call is re-
stored.

Consult?

Disconnect & return?

Disconnect

Alternate?

You can switch back and forth between two sub-
scribers by repeatedly selecting and confirming
"Alternate".

Disconnect & return?

Summary of Contents for OpenStage15































































































































































Search results

Summary of Contents for OpenStage15

Reviews:

Related manuals for OpenStage15

Brands by name

Popular brands

Siemens OpenStage15, Operating Manual

Search results

Summary of Contents for OpenStage15

Reviews:

Related manuals for OpenStage15

Brands by name

Popular brands