Siemens OpenStage15 Operating Manual Download Page 27

Page: 27 / 158

Getting to know your OpenStage phone

Once you have selected an entry, the following functions are available for
selection using the

key:

•

Dial

page 86

•

Details

page 86

Call attempts with date and time (up to ten can be saved)

•

Delete

page 86

Program/Service menu

You can make local settings here.

Press the

key and confirm the

User

menu. If configured, enter and

confirm your personal user password.

You can use the navigation keys to navigate through the menus as de-
scribed on

page 17. Once the admin password has been entered, the

Admin

menu is available to the relevant service personnel.

User settings

In the

User

menu, settings options are provided that allow you to adapt the

telephone to your individual requirements.

Select a menu using the navigation keys:
•

"Date and time"

page 134

•

"Audio"

page 139

•

"Configuration" e.g.

page 106 or

page 62

•

"Phone"

page 133

•

"Locality"

page 139

•

"Security"

page 107 or

page 109

•

"Network information"

page 147

•

"Reset"

If you are in one of these menus or submenus, depending on the situation,
you have the following options to leave the menus:
•

Save & exit

(If you have made a setting and want to keep it)

•

Exit (no save)

(If you have made a setting which you do not want to

use after all or if you do not want set any of the options)

•

Back

(If you want to leave the main menu or submenu)

•

Cancel

(If you do not want to perform any of the actions offered on the

submenu)

•

Press and hold the

key to access the option to leave the menu.

Summary of Contents for OpenStage15































































































































































Search results

Summary of Contents for OpenStage15

Reviews:

Related manuals for OpenStage15

Brands by name

Popular brands

Siemens OpenStage15, Operating Manual

Search results

Summary of Contents for OpenStage15

Reviews:

Related manuals for OpenStage15

Brands by name

Popular brands