OpenScape Voice functions
121
Step by step
For call rejection
As for selective call acceptance, you can create a selec-
tion list with the phone numbers of parties from whom
you are not willing to accept calls. Your service person-
nel know how long this list may be in the
OpenScape Voice used on site in your facility.
A call is not connected if the caller’s phone number
matches a number in the selection list; the caller is no-
tified that the called party rejects calls from this num-
ber. If the caller’s number is not in the selection list, the
call is to you as usual.
^
Lift the handset.
j
Enter the code (see the table of codes
Æ
page 132).
Various announcements deliver the following informa-
tion:
•
the name of the feature (selective call rejection)
•
the current status (active or inactive)
•
the current scope of the selection list.
These announcements are followed by verbal user
prompts that let you:
•
add entries to the selection list
•
delete entries in the selection list
•
check the selection list
•
activate or deactivate the function.
