30
When the temperature reaches 95
°
C, humidity control must be switched off, so a very short
segment (9) has to be carried out that lasts only a few seconds (e.g. 5 secs.)
To set segment
9 (
°
C)
Temperature 95
°
C
Duration 5 secs - Maintenance
hh : mm : ss
Durat.
0 : 0 : 5
Wait duration
: ON
M1
Channel 1
Control
: ON
Wait set point
: OFF
Max speed
: OFF
Set point
: 95.00
°
C
Grad.
: 0.00
°
C/min
Near set
: 1,00
°
C
M2
M3
Because the same temperature value
is maintained
OP2605-130
Channel 2
Control
: OFF
Wait set point
: OFF
Max speed
: OFF
M4
M5
Set point
: 95.00 RH %
Grad.
: 0.00 RH %/min
Near set
: 3,00 RH %
to save the programmed segment
Save segment
: SAVE
M8
EDIT PROGRAM
< ESC > Prev. menu
Segment N. 10
Water recharge:
OFF
Not used:
OFF
Not used:
OFF
SP. hum. CTRL.
ON
This data as well as the following data
will be ignored as the humidity control
has been switched off.
M6
To set segment
9 (% RH)
Humidity 95% (switch off humidity)
95
30
To switch off humidity control
M7
Wait for this number to appear.
9
Because the same temperature value
is maintained
• Press repeatedly
SHIFT
ENTER
WARNING!
If you have accidentally saved the same segment twice, correct the number on this page.
This page is visualized
Save segment
: OFF
Total segment
: 0
Confirm progr
: OFF
When this page is visualized, if the
previously described operations have
been carried out, the segment has
been saved and therefore must not be
saved again.
Move on to the next step.
Summary of Contents for OP7
Page 3: ......
