14
CYCLE START-UP
K1
VISUALIZED ON THE DISPLAY:
•
The key led light is switched on.
•
The machine starts, reaches the set temperature value (20
°
C) and continues
to operate along this value.
•
The set rising and descending value is reached at maximum speed.
3.2
STEP B
• Set a temperature slope from 20
°
C to 35
°
C with a gradient of 1
°
C/min and a 60% RH.
• Wait for the chamber to reach the set departure value (20
°
C) (Step A).
• Follow the example to programme a temperature slope as shown in the
diagram with the gradient that is indicated below.
• Move to the page shown below.
10
15
20
25
30
35
5
5’
10’
15’
t= min.
Temp
°
C
gradient: 1
°
C/min
K2
Settings
A1
A3
Temper. Set.
35.00
°
C
Humid. Set.
60.00 %
ENTER
To confirm.
If you enter the wrong number, you will
still have to press ENTER and then re-
digit the number.
Temper. Set.
20.00
°
C
Humid. Set.
0.00 %
A2
The previously set values are visual-
ized
Final temperature
Final humidity
K2
• Press this key to switch it
off (led light switched off)
If the machine has stopped:
• Press this key to start the
machine
KEYS
DISPLAY
FUNCTIONS
• Press
The chamber internal data are visual-
ized.
The chamber reaches these values and
maintains them.
Temp. meas.
.......
°
C
Humid. meas.
.......%
• Enter the values visualized on
the display in the page shown on
the right.
Summary of Contents for OP7
Page 3: ......
