Mounting/Installation
Mount and install additional power amplifiers
4
38 | 121
A6V11940317_en--_a
230 V connector
Pin
Description
Remark
1
AC 230 V N
Blue
2
NC
No connection
3
AC 230 V L1
Brown
Table 9: PV1002-A1 230 V connector
Fig. 12: PC1002-A2 power amplifiers connectors
PC1002-A2 amplifier connectors - 'TR1' to 'TR6'
Pin
Description
Remark
1
-
Do not use
2
+
Do not use
3
100 V
Speaker line 100 V +, white
4
70 V
Do not use
5
50 V
Do not use
6
C
Speaker line 100 V -, green
Table 10: PC1002-A2 amplifier connectors - 'TR1' to 'TR6'
Follow the steps below to mount the power amplifier PV1002-A1 on PC1002-A2:
Remove the protection foil from the rear of the amplifier before it is mounted.
1.
Screw the 2 lower screws of the amplifier onto the selected position of the
amplifier mounting area.
2.
Use these 2 screws as a support to the amplifier and put the amplifier into
place.
3.
Use the upper 2 screws to fix the amplifier and tight the lower screws.
4.
Connect the speaker cable to the designated speaker line plug.
