9 - 1
Siemens-Elema AB
SPR8-215.898.01
Page 1 of 8
MOBILETT Plus / - E/ - M
Solna, Sweden
Rev. 05
01.02
SPS-UD
Replacing the collimator lamp
9
•
Remove the cover (1) by removing the screws (4) marked "A" (Fig. 1). Turn the collimator
around so that the lamp housing is in front of the cover opening.
•
Remove the protective plate (2), covering the collimator lamp by loosening, not
removing, the screws marked "B" one turn. Do not adjust screws "C", "D", or "E" (Fig. 2).
•
Remove the defective lamp and replace it with a new lamp (Fig. 3). Do not touch the
bulb with bare fingers. (See "list of spare parts".)
•
Reinstall the protective plate. Tighten the screws marked "B".
Fig. 1
Fig. 2
Fig. 3
Equipment required:
Lux meter
75 75 75 75
9090
7
5
757
5
75
6
0
60
4
5
45
3
0
30
15
15
0 1515 3030 4545 6
060
7575
9090
7575
MOB00475
B
D
E
B
2
C
MOB00474
A
A
A
A
1
Replacement and repairs on the collimator
9
