Siemens EZ9**KZ series Instruction Manual Download

Page: 43 / 52

Hood control

Hood control settings

Hood control settings

You can adapt the hood controls on the hob to suit your

needs at any time.

Note:

The settings will only be displayed if the appliance is

connected to an extractor hood.

--------

Ajustes

Descripción y opciones

Fan control

If you wish, you can set the fan to start up after the hob is switched on, and you can configure the settings

depending on how you want the fan to run.

■

Switched off: You will need to switch the hood on manually when needed.

■

Switched on in automatic mode*: The hood switches on when setting an independent hob in auto-

matic mode.

■

Switch on in standard fan run-on*: The hood switches on when setting an independent hob to a fixed

setting.

Fan run-on

The fan continues running to ensure that residual odours are eliminated. The fan will switch off automati-

cally afterwards.

■

Off

■

Switch on in automatic mode.*

■

Switch on in standard fan run-on.

■

No change: The fan settings will not change if you switch off the hob.

Automatic light on

If you wish, you can set the hood light to automatically come on when the hob is switched on.

■

On* – The light switches on when you switch on the hob.

■

Off

Automatic light off

You can specify whether you want the hood lighting to be switched off automatically when you switch off

the hob.

■

Deactivated*

■

Activated: The lighting switches off when the hob is switched off.

Disconnect

You can delete the connections to your home network and extractor hood that you have saved at any time.

*Factory settings

Summary of Contents for EZ9**KZ series





















































Search results

Summary of Contents for EZ9**KZ series

Reviews:

Related manuals for EZ9**KZ series

Brands by name

Popular brands

Siemens EZ9**KZ series, Instruction Manual

Search results

Summary of Contents for EZ9**KZ series

Reviews:

Related manuals for EZ9**KZ series

Brands by name

Popular brands