Siemens EZ9**KZ series Instruction Manual Download Page 36

Page: 36 / 52

Home Connect

Home Connect

Home Connect

This appliance is WLAN-enabled and settings can be

sent to the appliance via a mobile device.
If the appliance is not connected to the home network,

the appliance functions in the same way as a hob with

no network connection. The hob can always be

operated via the control panel.
The availability of the Home Connect function depends

on the availability of Home Connect services in your

country. Home Connect services are not available in

every country.You can find more information on this at

www.home-connect.com.

Notes

■

Hobs are not designed to be used unattended - you

must always keep an eye on the cooking process.

■

Ensure that you follow the safety instructions in this

instruction manual and that these are also observed

when operating the appliance via the Home Connect

app. You must also follow the instructions in the

Home Connect app.

"Important safety

information" on page 6

■

Using the Home Connect app, you can send settings

to your appliance and then have to confirm them on

the appliance. It is not possible to operate the

appliance whilst you are away from home.

■

Operation on the appliance always has priority.

During this time, it is not possible to operate the

appliance using the Home Connect app.

Setting up

To implement settings via Home Connect, you must

have installed and set up the Home Connect app on

your mobile device.
Observe the Home Connect documents supplied for

this.
Follow the steps specified by the app to make the

settings.
The app must be open in order to perform the setup

process.

Automatic registration in the home network

You require a router that has WPS functionality.
You require access to your router.If you do not have

this, follow the steps for "Manually logging into your

home network".

Touch the

symbol in the docking menu to open

the basic settings.

Touch the "Home Connect" setting.

Touch "Use wizard to configure settings" to launch

the Home Connect assistant.

A message will appear regarding the mobile device.

Touch "Next" to continue.

Press the WPS button on the router within the next

2 minutes.

A message will be displayed to notify you when the

hob is successfully connected to your home

network.

Note:

If it is unable to connect, relaunch the assistant or

manually log the appliance into your home network.

A message will appear to say that the appliance can

now be connected to the app.

Touch "Next" to begin the process of connecting to

the app.

A message is displayed to notify you that the

connection has been successful. The

symbol will

appear on the main screen. The brightness with which

the

symbol lights up indicates the strength of the

connection.

8VHZL]DUGWRFRQILJXUHVHWWLQJV

+RPH&RQQHFW

&RQQHFWLRQWRQHWZRUNVXFFHVVIXO

&RQWLQXHWRFRQQHFWWRWKHDSS

&RQQHFWWRQHWZRUN

1H[W

Summary of Contents for EZ9**KZ series





















































Search results

Summary of Contents for EZ9**KZ series

Reviews:

Related manuals for EZ9**KZ series

Brands by name

Popular brands

Siemens EZ9**KZ series, Instruction Manual

Search results

Summary of Contents for EZ9**KZ series

Reviews:

Related manuals for EZ9**KZ series

Brands by name

Popular brands