Siemens EZ9**KZ series Instruction Manual Download

Page: 41 / 52

Hood control

Hood control

Hood control

You can connect this appliance to a suitable extractor

hood and then control the functions of the hood via your

hob.
You have various options for connecting the appliances

together:

Home Connect

Two appliances can be connected using the Home

Connect app provided that both of them are Home

Connect-compatible.
Both appliances can be controlled via the app and via

the control panel.
Refer to the Home Connect documents supplied and

the Home Connect section for more information.

"Home Connect" on page 36

Connecting appliances directly

If the appliance is connected directly to an extractor

hood, the extractor hood can be controlled via the hob.

It is then not possible for either of the appliances to

connect to your home network or to the app. Both

appliances can be controlled via the control panel.

Connecting appliances via your home network

Use this type of connection if neither or one of the two

appliances is connected to the Home Connect app.
If the appliances are connected to each other via your

home network, you can use both the hood controls and

Home Connect to operate the hob.

Notes

■

Make sure you follow the safety instructions in the

instruction manual for your extractor hood and that

these are complied with even when operating the

appliance via the hood controls on the

hob.

"Important safety information" on page 6

■

If the appliance is being operated by means of the

controls on the extractor hood, this mode of

operation always has priority. It is not possible to use

the hood controls on the hob during this time.

■

In networked standby mode, your appliance requires

a maximum of 2 W.

Setting up

To set up the connection between the hob and the

extractor hood, the hob must be switched on.

Connecting directly

Make sure that the extractor hood is switched off.
For more information refer to the section entitled

"Connecting to the hob" in the instruction manual for

your extractor hood.

Note:

If you connect your hob directly to the extractor hood, it

cannot be connected to your home network as well and

you will not be able to use Home Connect.

Touch the

symbol in the docking menu to open

the basic settings.

Select the Hood control cookConnect hood control

setting.

Touch "Connect directly".

You have 2 minutes to initiate the connection

process on the extractor hood.

A message is displayed to notify you when the hob is

successfully connected to the extractor hood. The

symbols for the hood controls on the hob are displayed

on the main screen.

Summary of Contents for EZ9**KZ series





















































Search results

Summary of Contents for EZ9**KZ series

Reviews:

Related manuals for EZ9**KZ series

Brands by name

Popular brands

Siemens EZ9**KZ series, Instruction Manual

Search results

Summary of Contents for EZ9**KZ series

Reviews:

Related manuals for EZ9**KZ series

Brands by name

Popular brands