Siemens EZ9**KZ series, Instruction Manual

Page: 28 / 52

en
Cooking sensor
28
Setting procedure
1.
Attach the cooking sensor to the saucepan; see the
section entitled
2.
Fill the cookware with a sufficient amount of liquid,
put the lid on and place it on the cooking surface.
See the section entitled
~
"Fitting the wireless
temperature sensor" .
3.
Touch the cooking position display for the cookware.
4.
Touch the active cooking mode and select the
»
Cooking sensor option.
Note:
The cooking sensor is only available if the
wireless cooking sensor is connected to the control
panel. See the section entitled
~
"Wireless
temperature sensor"
5.
Touch the
»
symbol for the wireless temperature
sensor.
6.
Select the temperature level.
The function has now been activated.
The cooking position indicator and the selected
temperature flash until the selected temperature has
been reached. A signal then sounds.
7.
When the signal tone sounds, remove the lid and
add the food. Leave the lid on while cooking.
Tip:
If you want to set the temperature more precisely,
you can increase or decrease this by 1 °C to 5 °C. To
do this, touch the selected temperature and then touch
the
©
symbol.
Then select the required temperature.
To cancel and exit the menu, touch the
¶
symbol.