Siemens EZ9**KZ series Instruction Manual Download

Page: 40 / 52

Home Connect

Confirming settings

Once cooking settings have been successfully

transmitted to a cooking position, a message will

appear on the hob. You will be asked whether you want

to use these settings. To confirm that you want to use

these settings, touch "Apply". To reject these settings,

touch "Discard".

Software update

Using the software update function, the hob's software

can be updated (e.g. for the purpose of optimisation,

troubleshooting or security updates). To use the app,

you must first register as a Home Connect user, install

the app on your mobile device and connect to the

Home Connect server.
The Home Connect app will tell you when a software

update is available. You can start the software update

via the app or the hob. To do this, refer to the

instructions on the display.
Once the update has been successfully downloaded,

you can install it via the Home Connect app if you are

connected to your local area network.
The Home Connect app will notify you when the update

has been successfully installed.

Notes

■

You can continue to use the hob as normal while

updates are downloading.

■

Depending on your personal settings in the app,

software updates can also be set to download

automatically.

■

We recommend that you install security updates as

soon as possible.

Remote diagnostics

If a fault occurs, the after-sales service can use remote

diagnostics to access your appliance.
Contact the after-sales service, making sure that your

appliance is connected to the Home Connect server

and checking that the remote diagnostics service is

available in your country.

Note:

For more information and to check whether the remote

diagnostics service is available in your country, please

visit the Help & Support area of the Home Connect

website for your country: www.home-connect.com

About data protection

When your appliance is connected for the first time to a

WLAN network, which is connected to the Internet, your

appliance transmits the following categories of data to

the Home Connect server (initial registration):

■

Unique appliance identification (consisting of

appliance codes as well as the MAC address of the

installed WiFi communication module).

■

Security certificate of the WiFi communication

module (to ensure a secure IT connection).

■

The current software and hardware version of your

domestic appliance.

■

Status of any previous resetting to factory settings.

This initial registration prepares the Home Connect

functions for use and is only required when you want to

use these Home Connect functions for the first time.

Note:

Ensure that the Home Connect functions can be used

only in conjunction with the Home Connect app.

Information on data protection can be accessed in the

Home Connect app.

Declaration of Conformity

BSH Hausgeräte GmbH hereby declares that the

appliance which features Home Connect is in

accordance with the basic requirements and the other

relevant provisions of the directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found

online at www.siemens-home.bsh-group.com on the

product page of your appliance with the additional

documents.

2.4 GHz band: max. 100 mW

5 GHz band: max. 100 mW

5 GHz Wi-Fi: for indoor use only

Summary of Contents for EZ9**KZ series





















































Search results

Summary of Contents for EZ9**KZ series

Reviews:

Related manuals for EZ9**KZ series

Brands by name

Popular brands

Siemens EZ9**KZ series, Instruction Manual

Search results

Summary of Contents for EZ9**KZ series

Reviews:

Related manuals for EZ9**KZ series

Brands by name

Popular brands