106 / 244
Siemens
Standard application AHU
CE1P3977en_02
Building Technologies
Detail pages: Inputs and outputs
01.02.2010
Parameter
Range
Function
Communication infos
– Comm OK
– ????
Information on the communication status for elements.
– No error.
– Error (Varies – depends on communication – not
yet implemented).
6.6 Digital inputs
6.6.1 General
The details page for digital inputs can be reached multiple ways, including:
•
Main Index > Unit > Inputs > Digital inputs > Element
or
•
Main Index > Unit > Inputs > Digital inputs > Extr air dmper fdbk
•
Main Index > Unit > Element Control > Element Group > Extr air dmper fdbk
or
•
Main Index > Unit > Damper control > Damper > Extract air fdbk
Parameter
Range
Function
Present Value
Depends on hardware.
Present input value. Value is frozen for an alarm.
Reliability (Basis
Controller)
– OK.
– Other
– Process Error
– Config Error
Reliability state for hardware.
– Calibration lacking. Controller must be returned to
the factory.
– Internal fault.
– Input not configured.
Reliability (Extension
Modul POL 955)
– OK.
– Other
Reliability state for hardware.
– Calibration lacking. Controller must be returned to
the factory; internal fault or input not configured.
OffNormal
– Passive
– Active
Displays OffNormal alarms:
– No alarm.
– Alarm
Operating hours
0... [h]
Number of operating hours for the input: Time, dur-
ing which input = TRUE applies.
Operating seconds
(Reset)
0... [s]
Number of operating seconds for the input. Input of
0 seconds reset operating hours to 0.
Last op hours reset
Wday, dd.mm.yyy
hh:mm:ss
Date and time for the last time operating hours was
reset.
Time delay
0…65535 [s]
Alarm time delays for off normal alarms.
Special settings
---
Go to Special settings page (at access levels 4 and
2 only).
Special infos
---
Go to Special info page (at access levels 4 and 2
only).
Access
Example
Parameter
Basis Document Siemens Climatix Control System
BDCX.100820.01GB
Page 106