Camera settings
56
Siemens AB
Security Products
05.2014
12.3.19 File Location (Snapshots and Web Recording)
The File Location setting can be found under this path:
System> File Location
.
Users can specify a storage location on the PC or in the hard drive for the snap-
shots and live video recording. The default setting is: C:\. Once confirm the setting,
click on <Save>, and all the snapshots and web recording will be saved in the des-
ignate location.
NOTE:
Please make sure the selected file path contains valid characters such as
letters and numbers.
NOTE:
For users with Windows 7 operating system, it is required to log on as an
administrator to implement the Snapshot and Web Recording function.
12.3.20 View Information
The View Information function can be found under this path:
System> View In-
formation
.
Click on the category: <View Information>, there will be a drop-down menu with
tabs including <Log File>, <User Information> and <Parameters>.
Log File
The Log File function can be found under this path:
System> View Information>
Log File
.
Click on the tab to view the system log file. The content of the file provides useful
information about connections after system boot-up.
User Information
The User Information function can be found under this path:
System> View In-
formation> User Information
.
The a
dministrator can view each added user’s login information and privileges (re-
fer to
Security
).
Get User Information
All the users in the network will be listed in the <User information> zone as shown
below.
User: 4321
It indicates that one user’s login username is “User”, and the password is “4321”.
Get User Privacy
Click on <get user privacy> at the bottom of the page, and the administrator can
view each user’s privileges as shown below.
User: 1:1:0:1
1:1:0:1= I/O access : Camera control : Talk : Listen (refer to
Security
)
Therefore, it denotes the user is granted privileges of I/O access, Camera control
and Listen.
Parameters
The Parameters function can be found under this path:
System> View Infor-
mation> Parameter
.
Summary of Contents for CCMS2010-IR
Page 95: ......