Siemens BT Diverse 4016 Executive User Manual Download

Page: 66 / 76

Diverse 4016 Executive ~ 7th Edition ~ 21st September ~ 4080

Handset does not ring.

The handset ringer may be

Hold down

✱

to switch the ringer

switched off.

back on.

You cannot dial external numbers.

Call barring may be set.

Switch off call barring (see page 45).

Your cannot hear your caller.

The

LEFT

navigation button has

Press

to switch the

been pressed and the microphone

microphone back on.

is muted.

The incoming caller’s number is

The caller’s number has been

Caller has to allow their number to

not displayed even though you

withheld.

be sent.

have Caller Display.

You keep hearing the error beep

You have pressed the wrong

Check the prompts in the display

(a descending tone)

button in a sequence.

or refer to instructions in the
user guide.

The answering machine

The PIN entered is the wrong

Re-enter the base station PIN or set

announces “PIN is incorrect”

one or it is still set to

0000

a PIN other than

0000

during remote access.

The answering machine will

The memory is full.

Delete old messages. Play back and

not record.

delete new messages.

Answering machine messages

Date/time has not been set.

Set the date and time (see page 14).

do not have the date and time
attached.

HELP

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for BT Diverse 4016 Executive













































































Search results

Summary of Contents for BT Diverse 4016 Executive

Reviews:

Related manuals for BT Diverse 4016 Executive

Brands by name

Popular brands

Siemens BT Diverse 4016 Executive, User Manual

Search results

Summary of Contents for BT Diverse 4016 Executive

Reviews:

Related manuals for BT Diverse 4016 Executive

Brands by name

Popular brands