Diverse 4016 Executive ~ 7th Edition ~ 21st September ~ 4080
12
WARNING
Under no circumstances should
non-rechargeable batteries be used.
Only use the approved batteries.
Using unapproved batteries will
invalidate your guarantee and may
damage the telephone.
3
Registering and charging
the handset
The display is protected by a plastic
film. Remove the protective plastic film
from the display.
Menu
Menu
INT 1
To register your handset, place it in the
base station with the display facing
upward. After approx. one minute, the
handset’s internal number is displayed
(e.g.: INT1). Successful registration is
signalled by a confirmation tone.
When the handset is registered the
display will show:
If the icons on the display
flash continuously...
It means that the handset is not
registered with the base station.
Ensure you have correctly carried out
step 3 above. If the product has still
not registered, please see “Registering
manually” on page 60.
All additional handsets you purchase
will need to be individually registered
with the base station before they will
work with the Diverse 4016 Executive.
Leave the handset for approx. 16 hours
in the base station to charge the
batteries, as they are not charged in the
factory. The charging status icon
flashes on the handset to indicate that
the batteries are being charged.
Insert the batteries
Insert the two batteries supplied, as
indicated on the label inside the battery
compartment and slide the battery
compartment cover shut.
The battery cover may be found in the
packaging with the batteries.
SETTING
UP
All manuals and user guides at all-guides.com
