Siemens Ardoptix PT 140 AF1, Operating Manual, Page: 35 / 68

s
Operating manual
27
16.1.4 Configuration I/O
(Configuration layer:
C010
)
In the factory default configuration, all parameter settings for digital in-
puts and outputs will be hidden.
Parameter Function Explanation
TYPE
Operating mode/
measuring technique
Q ratio mode (quotient)
L1
Lambda 1
L2 Lambda 2
LED.
LED (green)
OFF OFF
ON ON

LED.S
LED: define source
RDY
Status LED indicates ‘ready’
L1 Lambda 1
L1.PR Lambda 1 without peak picker
L2
Lambda 2
L2.PR. Lambda 2 without peak picker
Q Two-colour/ratio mode
Q. PR. Two-colour/ratio mode without peak
picker
TU Inner device temperature
1NTY. Signal intensity
M.TR.1
Triggered by ATD function Lambda 1*
M.TR.2
Triggered by ATD function Lambda 2*
M.TR.Q Triggered by ATD function two-
colour/ratio mode*
DIRT
Dirt Alert
A.AC.1 Measuring time ATD Lambda 1*
A.AC.2 Measuring time ATD Lambda 2 *
A.AC.9
Measuring time ATD
two colour/ratio mode
*

LED.F
LED function
LVL.
Switch direction “Level” (LED acti-
vated if limit exceeded)
LVL.-
Switch direction “Level” (LED
/ out-
put inverted)
RN6.
Switch direction “Range” (LED acti-
vated if range exceeded)
RN6-
Switch direction “Range” (LED / out-
put inverted)

LED.T
LED switching
threshold
Temperature limit
(only available at function “Level”)

LED.H
LED signal threshold
Hyst/- relative to signal threshold
(only available
at function “Level”)

LED._
LED lower limit of
range
Lower limit of range for switch signal
(only
available function “range”)

LED.~
LED upper limit of
range
Upper limit of range for switch signal
(only available function “range”)

LED.L
LED delay time

LED.M
LED hold time

BU2.
Buzzer
OFF
OFF
ON ON

BUZ.S
Buzzer: define source
RDY
Status LED indicates ‘ready’
L1 Lambda 1
L1.PR
Lambda 1 without peak picker
L2 Lambda 2
L2.PR. Lambda 2 without peak picker
Q Two-colour/ratio mode
Q. PR.
Two-colour/ratio mode without peak
picker
