Siemens Ardoptix PT 140 AF1, Operating Manual, Page: 12 / 68

s
Operating manual
4
3.2
User’s responsibility
The pyrometer may only be used when it is in perfect working condition.
3.3 Electromagnetic Compatibility
The devices comply with the essential safety requirements of the Elec-
tromagnetic Compatibility Directive 2014/30/EU (EMC Act).
4 Scope of delivery
Make sure that all of the following components have been included with
your shipment:

Pyrometer

Carrying case

Power supply

Calibration certificate

Software CellaView (Download Version)

USB cable
5 General Description
5.1 Intended Use
The Ardoptix PT series provides efficient pyrometers for non-contact
temperature measurements.
The two-colour pyrometer Ardoptix PT 14x measures the intensity of in-
frared radiation at two different wavelengths. The ratio of these two in-
tensities is proportional to the temperature. The Ardoptix PT 14x is used
for temperature measurement from 650 °C to 2400 °C. These instru-
ments serve a broad range of applications which include the iron and
steel producing industry as well as the metal, glass, cement and chemi-
cal industries.
5.2 Operating Controls and Display
The rear panel of the Ardoptix has a 4-digit display and 4 push-buttons.
The display normally indicates the currently measured temperature. Dur-
ing configuration (using the push-buttons), the display will show the pa-
rameter you are setting. Whenever the display shows a parameter, the
F1 Parameter LED (yellow) will light up. During a running measurement,
the F2 Status LED (green) will light up.