Siemens Ardoptix PT 140 AF1, Operating Manual, Page: 32 / 68

s
Operating manual
24
TSP~
Plausibility
threshold **
For ATD function, see Chap. 15.2.4

MEM.T
Hold time for Min/Max
Hold time in sec.

FIL.M
Smoothing filter for
min/max*
OFF OFF
ON ON

FIL.T
Smoothing time*
Time t98 in sec.

END
End
Exit menu
* Only available with Min/Max and Double Max modes
** Only available with ATD function
16.1.2 Temperature measurement lambda 1
(Configuration layer:
C002
)
In the factory default configuration, all parameter settings for digital in-
puts and outputs will be hidden.
Parameter Function Explanation
E.TB.1
Array size
Use array with 1-10 entries or enter material
constant directly into the pyrometer
EPS.1
Emissivity factor L1
Enter material constant directly into the py-
rometer
E.IDX
Memory position
Choose an entry from the material constants
array

E. 01
Assign material
constants
Customize the array; assign a value to each
of the material constants in the array. Possible
indexes depend on the size of the array

TAU.1
Transmittance factor
L1
BAC.1
Ambient temperature
compensation

BAC.T
Temp. of ambient
source of radiation

BAC.%
Influence of ambient
IR radiation
The reflected thermal radiation from the sur-
roundings as a portion of the total IR radiation
collected by the sensor in %

LIN.1
Temperature offset
using linear
OFF
off
2-10
number of nodes used

L. X1
node x 1 - 10
Signal input (initial value) node n

L. Y1
node y 1 - 10
Signal output (resulting value) node n

FIL.1
Smoothing filter
OFF smoothing not activated
ON simple smoothing

FIL.T
Smoothing time
time t98 in sec for simple smoothing

MEM.1
Min/Max memory
OFF off
MIN
lowest (min.)temperature, single
MAX highest (max.) temperature, single
DBL.M double maximum
DIS.M ATD function
MEM.T
Hold time for Min/Max
Hold time in sec.

FIL.M
Smoothing filter for
min/max*
OFF OFF
ON ON

FIL.T
Smoothing time*
Time t98 in sec.
