Siemens 6ES7144-5KD50-0BA0 Manual Download Page 28 | Manualshive

Page: 28 / 55

background image

Parameters/address space

4.3 Explanation of the parameters

Analog input module AI 4xRTD/TC 4xM12 (6ES7144-5KD50-0BA0)
Equipment Manual, 08/2020, A5E48753535-AA

27

The possible compensation types that can be parameterized via the parameter "reference

junction" are set out in the table below.

Table 4- 5

Parameterizable compensation types for the "reference junction" parameter

Compensation

type

Explanation

Fixed reference

temperature

Properties

With this type of compensation, the reference junction temperature is stored as a fixed value.

Principle of operation

The reference junction temperature is specified in the "fixed reference temperature" parameter.

The possible value range is displayed in the Table 4-4 Value ranges for the "reference temperature" for

thermocouples. (Page 25).

The configured reference junction temperature applies to all channels of the module that you have

selected for this type of compensation.

Wiring

Connect the thermocouples to terminals 3 and 4 from the reference junction with copper cables.

If you detect the reference junction temperature directly at the M12 connector of the

AI 4xRTD/TC 4xM12, you can also connect the thermocouples directly or with compensating lines.

Dynamic reference

temperature

Properties

With this compensation, the reference junction temperature can be measured via an external module

of another station.

Principle of operation

The reference junction temperature is transferred by means of SFB 53 by the data records 192 - 195

from the CPU to the AI 4xRTD/TC 4xM12 electronic module.

Each channel that you select for this type of compensation can have its own reference junction tem-

perature assigned to it via the user program. For more information, see section Structure of a data

record for dynamic reference temperature (Page 32).

Wiring

Connect the thermocouples to Terminals 3 and 4 from the reference junction with copper cables.

If you detect the reference junction temperature directly at the M12 connector of the

AI 4xRTD/TC 4xM12, you can also connect the thermocouples directly or with compensating lines.

«
...
26
27
28
29
30
...
»

Summary of Contents for 6ES7144-5KD50-0BA0
























































Reviews:

No comments

Related manuals for 6ES7144-5KD50-0BA0

Brand: GEA Pages: 66

Brand: OBSIDIAN CONTROL SYSTEMS Pages: 13

MaestroKitchen 100

Brand: Harman Kardon Pages: 36

Brand: Magnavox Pages: 23

Brand: Sandstrom Pages: 32

Brand: Vip-Vision Pages: 40

Brand: D-TACQ Solutions Pages: 8

Mainsboost Plus

Brand: Stuart Turner Pages: 28

Brand: Ravaglioli Pages: 102

Loft Universal 3399

Brand: Fermax Pages: 2

The One MP-TO-01-C

Brand: Meet PAT Pages: 14

Brand: b-red Pages: 12

AeGIS 8000 Series

Brand: PACH & COMPANY Pages: 14

Brand: DAPAudio Pages: 17

Brand: auna multimedia Pages: 9

Brand: Ricatech Pages: 64

Villa Door Station

Brand: Dahua Pages: 37

Brand: Contec Pages: 78

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands