Procedure for spring-loaded terminal blocks
Step
Operating instruction
Figure
1
To release the terminal spring, insert the 3‑mm
flat-head screwdriver into the square opening of
the spring-loaded terminal until it engages.
Please observe a 10° horizontal angular devia‐
tion of the screwdriver to the oval opening.
~10°
~10°
3 mm
2
Insert the cable into the oval opening as far as it
will go.
3
Hold the cable in the spring-loaded terminal.
4
Remove the screwdriver.
5
Pull on the cable to ensure it is tight.
Connecting
6.2 Connecting terminal blocks
3TK2810-1 safety-related speed monitor
Equipment Manual, 05/2020, NEB926246402000/RS-AE/007
43
