Adding/removing memory (PCD-5ND) System
expansion
2
1
a
Insert the memory module, contacts first, into the slot (1).
The slot on memory module (a) must be in line with the corresponding part at
the mounting location.
Carefully flap the memory module down (2) until you feel it latch in place.
Install the second memory module in the same way.
2
3
1
a
4
Place the cover on its mounting location (1) and flap it into place on the
underside of the notebook (2).
Push the cover as far as it will go in the direction of the arrow (3).
Fasten the cover with the two screws (4).
Place the notebook bottom-down on a flat surface.
Reconnect the cables you disconnected earlier.
A26391-K64-Z100-2-7619
75
