Siemens Nixdorf PCD-4ND Operating Manual Download Page 75

Page: 75 / 132

Power Management Setup System

configuration

High Performance mode

You can select High Performance mode by pressing function key

. In this mode

the notebook operates at maximum speed and uses the most power.

To re-enable the default power management features, press function key

Power Management

You use this field to specify when the power management features are to be used.

Enable for Battery Powered only

The power management features are only used if the notebook is
running on its built-in battery (default).

Disable

The power management features are not used.

Always Enable

The power management features are permanently enabled.

Video Access Trigger

You use this feature to define how power management is to react to display output.

Enable

Output to the display is treated as system activity and resets the
timer (e.g., for

LCD Power Down

) (default).

Disable

Output to the display is not treated as system activity. You must
use this setting if you intend to use a screen saver or are running
OS/2.

Doze Mode

Enable

If the system registers no activity for a specific period of time, the
CPU speed is reduced to save power. Any resumption of activity
causes the CPU speed to return to normal (default).

Disable

The Doze mode is disabled.

A26391-K64-Z100-2-7619

Summary of Contents for PCD-4ND





































































































































Search results

Summary of Contents for PCD-4ND

Reviews:

Related manuals for PCD-4ND

Brands by name

Popular brands

Siemens Nixdorf PCD-4ND, Operating Manual

Search results

Summary of Contents for PCD-4ND

Reviews:

Related manuals for PCD-4ND

Brands by name

Popular brands