Setting up security features - Security Setup System
configuration
If you do not wish to use the system password as the setup password or if you wish
to change the setup password:
Select
Setup Lock
.
Enter the new setup password and press the Enter key.
Enter the new setup password a second time to confirm it and press the Enter
key. The following message is displayed:
New password is now installed, press any key ...
Press any key to continue.
Select
Setup Lock
.
Insert the disk
System Utilities
in the floppy disk drive.
Press the Enter key.
The setup password is saved in encrypted form on the disk
System Utilities
.
Docking unit password
This field only appears if the notebook is connected to a docking unit. It lets you
specify whether docking-unit access is to be controlled by means of a password.
Enable
You have to enter a password in order access the docking unit.
Disable
You can access the docking unit without having to enter a
password (default).
If you wish to specify a docking unit password:
Select
Docking Unit Password
.
If the field is set to
Disable
, change this setting to
Enable
.
Enter a docking unit password and press the Enter key.
The password can consist of a maximum of eight letters and numbers.
Enter the docking unit password a second time to confirm it and press the Enter
key. The following message is displayed:
New password is now installed, press any key ...
Press any key to continue.
A26391-K64-Z100-2-7619
61
